Wreck diving is often associated with recreational diving and exploring shipwrecks. Although wrecks are the most common site for wreck diving, there is a growing trend to scrape old ships to make artificial reef sites. For more information on wreck diving, please read the following. Here are some tips to help you get started. First, get your equipment ready! There are several different types of equipment. Getting the right kind of gear can make the difference between a fun and dangerous dive.
NON-PENETRATION WRECK DIVING
Here are some tips for beginners who want to dive non-penetration. First, wrecks often provide a great place to fish. Divers should be aware that lines and fishing nets may be in the area. Also, divers should be aware of the terrain beneath them. Currents and sharp edges can cause them to drift away from their desired destinations. While it's not advisable to dive in this type of terrain, non-penetration wreck diving is a good option.
It may sound simpler, but technical penetration diving can pose a lot of dangers. You could be trapped in narrow passageways or face overhead hazards when diving in the "light zone". Furthermore, the presence of silt and mud in some wrecks can severely compromise visibility and make orientation very difficult. To avoid these dangers, non penetration wreck diving requires that divers stay within the visible zone and make a move towards an exit point.
A sunken wreck is surveyed
To survey a sunken ruin, in addition to traditional surveys and knowledge of the maritime history of this area, you will need specific equipment. Depending upon the time and accuracy needed, the survey method can include a GPS fix, a tape baseline or offset and tie measurements. Sonar and other non-destructive techniques can all be used to survey a sunken shipwreck.
A shipwreck investigation is designed to identify and locate the ship. It should also identify navigational hazards, environmental conditions, and historical events. The survey report should include a summary of the vessel's structural features, the incident that sank it, and any prior archeological surveys. It should also be possible to plot the location on a nautical map in order to take precise measurements.
Equipment necessary
You should be familiar with the shipwreck before you dive it. Learn about the layout of the wreck, its key points and potential hazards. These facts will help prepare you for your dive. You'll find information about all the equipment required to dive a shipwreck. Before you dive, be sure to go through the checklist.
Proper buoyancy control can prevent you from losing your way in dark waters. For wreck diving, you need to have good buoyancy control. It's not recommended to dive in deep water without a buoyancy control tank and a weight belt. However, if you're looking to have a fun dive, a weight belt and a scuba regulator are essential. These two pieces of equipment will ensure that you and others are safe.